Pentax OPTIO Optio 750Z Operating Manual page 172

4
Press the four-way controller (5).
The Sensitivity options screen appears.
5
Use the four-way controller
(2345) to select the sensitivity
of the film loaded in the film
camera.
When you have selected the appropriate
sensitivity, press the 4 button to return to the [7 Dig. Exp.
Metering] menu.
The [Sensitivity] setting on the [7 Dig. Exp. Metering] menu is only
valid in Digital Exposure Metering mode. The [Sensitivity] setting on
the [A Rec. Mode] menu does not affect the settings in Digital
Exposure Metering mode. The [Sensitivity] settings in Digital
Exposure Metering mode and Capture mode are not interlinked. The
LCD monitor display may not achieve the brightness level
corresponding to the selected sensitivity.
6
Use the four-way controller (23) to select [Exposure
Step].
7
Use the four-way controller (5) to display the Exposure
Step options.
A pull-down menu appears.
8
Use the four-way controller (23)
to choose [1/2EV] or [1/3EV].
Choose whether to set the exposure in 1/2
EV steps or 1/3 EV steps. When you have
selected the exposure step, press the 4
9
button to return to the [7 Dig. Exp.
Metering] menu.
The Exposure Step setting that you have selected affects the EV
display on the screen. For example, if you select [1/2EV], the EV
scale and exposure metering results described later will be
displayed in 1/2 EV steps.
9
Use the four-way controller (23) to select [Color
Mode].
170
Sensitivity
6 8 10
12 16 20
25 32 40
50 64 80
100 125 160
200 250 320
Cancel
MENU OK
Dig. Exp. Metering
S e n s i t i v i t y 1 0 0
E x p o s u r e S t e p 1 / 2 E V
C o l o r M o d e 1 / 3 E V
C a n c e l
MENU OK
OK
O K