Quick Start; Taking Still Pictures - Pentax OPTIO Optio 750Z Operating Manual

2
The standard procedure for taking still pictures is described below. The
flash fires automatically depending on the light conditions.
1
Press the power switch.
The camera turns on.
2
Set the mode dial to R.
3
Check the image on the LCD
monitor.
The focus frame in the middle of the LCD
monitor indicates the zone of automatic
focusing.
You can change the captured area by pressing the Zoom/w/x button
to the right or left.
x : enlarges the subject
w : enlarges the area captured by the camera
You can check the captured area by looking through the viewfinder.
The image in the viewfinder always appears with a 4:3 aspect ratio
regardless of the aspect ratio setting of the image. Use the LCD
monitor when taking pictures with the aspect ratio set to 3:2.
4
Press the shutter release button halfway.
The focus frame turns green if the subject is in focus.
32

Quick Start

Taking Still Pictures

i button
Mode dial
Shutter release
button
Zoom/w/x button
09/25/2004 09/25/2004 09/25/2004
14:25 14 14:25
Focus frame
38 38
:25