Saving Your Settings (Memory) - Pentax Optio E60 Operating Manual

Saving Your Settings (Memory)

The Memory function is for saving the current camera settings even
when the camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to O (On)
or P (Off) in the Memory function are shown in the table below. (Items
not listed here are always saved in the selected settings when the
camera is turned off.) If you select O (On), the settings will be saved in
the status they were in immediately before the camera was turned off. If
you select P (Off), the settings will be reset to the defaults when the
4
camera is turned off. The table below also shows whether the Memory
default setting for each item is on or off.
Item
Face
Recognition
Flash Mode
Drive Mode
Focus Mode
Zoom Position The zoom position set with the Zoom/w/x button (p.73)
Sensitivity
EV
Compensation
Digital Zoom
DISPLAY
File No.
90
The Face Recognition mode set with the
The flash mode set with the four-way controller (4) (p.79)
The drive mode set with the four-way controller (2) (p.85,
p.86)
The focus mode set with the four-way controller (5) (p.76)
The [Sensitivity] setting on the [A Rec. Mode] menu (p.81)
The [EV Compensation] setting on the [A Rec. Mode]
menu (p.83)
The [Digital Zoom] setting on the [A Rec.Mode] menu
(p.75)
The display information display mode set with the 4/
W button (p.84, p.97)
If a new SD Memory Card is inserted when On has been
selected, file numbers are assigned sequentially.
Description
I
Default
Setting
button (p.51)
P
O
P
P
P
P
P
O
P
O