Pentax Optio E60 Operating Manual page 34

6
Press the four-way controller (3).
The frame moves to [Date].
1
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller (23)
to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in Step 4, the setting
switches between am and pm corresponding to the time.
9
Press the 4 button.
The setting is set and the camera returns to capture status.
[Language/
Refer to the pages below for instructions.
• To change [Language/
Language" (p.147).
• To change [Date] and/or [Time], follow the steps in "Changing the Date
and Time" (p.143).
• To change [Hometown] or turn [DST] on and off, follow the steps in
"Setting the World Time" (p.145).
When the [Initial Setting] or [Date Adjust] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the 3 button. In this case, the [Initial Setting] screen
will appear next time you turn the camera on.
If you press the 4 button in Step 9, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. Refer to "List of World Time Cities"
(p.156) for the video output format of each city set as the Initial Setting, and
"Changing the Video Output Format" (p.151) for changing the setting of the video
output format.
32
], [Date], [Time], [Hometown] and [DST] can be changed.
], follow the steps in "Changing the Display
Date Adjust
Date Style mm dd yy / /
Date 01/01/2008
Time 0:00
MENU Cancel
Date Adjust
Date Style mm dd yy / /
Date 01/01/2008
Time 0:00
MENU Cancel
24h
OK OK
24h
OK OK