Messages - Pentax Optio E60 Operating Manual

Messages

Messages such as the following may appear on the display during
camera operation.
Battery depleted
Built-in memory full
Memory card full
Memory card error
Card not formatted
Card locked
Compression error
No image/sound
Deleting
Camera cannot play this
image and sound
Image folder could not
be created
Protected
Data being recorded
The batteries are exhausted. Replace with new batteries. If
using rechargeable batteries, charge the batteries. (p.19)
The built-in memory/SD Memory Card is full and no more
images can be saved.
Insert a new SD Memory Card or delete unwanted images.
(p.23, p.108)
Change the quality level or recorded pixels of recorded
images and try again. (p.116)
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to display or
copy the images on the card using a computer.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
not compatible with this camera. Format the SD Memory
Card in the camera. (p.140)
The SD Memory Card is write-protected. (p.25)
This message appears when compression of images has
failed. Change the quality level/size and record or save
again.
There are no image/sound files on the SD Memory Card.
This message appears when the camera is deleting an
image or sound file.
You are trying to play back an image or sound in a format
not supported by this camera. You may be able to play it
back on another brand of camera or your computer.
The largest file number (9999) has been assigned to an
image in the largest folder number (999) or the number of
image, movie, and sound files recorded on the SD Memory
Card has reached 10000 and no more files can be saved.
Insert a new SD Memory Card or format the card. (p.140)
The image or sound file you are trying to delete is protected.
This message appears when you try to switch to the
playback mode while an image is still being recorded, or
when the protect setting or DPOF setting is being changed.
It disappears after the image is recorded or the setting is
changed.
9
163