Reducing Camera Shake and Blurring When
Taking Pictures (Digital SR Mode)
4 (Digital SR) allows you to set the sensitivity higher than other
4
shooting modes to reduce camera shake and blurring. Use this mode
under the shooting conditions that camera shake or blurring tends to
occur.
1
Press the four-way controller (3) in the capture mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select 4.
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture status.
4
Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
5
Press the shutter release button
fully.
The picture is taken.
62
Shutter release button
Four-way controller
4 button
Available in 4
05/05/2008
05/05/2008
19:25
19:25
19:25
38 38 38