Reducing Camera Shake And Blurring When Taking Pictures (Digital Sr Mode) - Pentax Optio E50 Operating Manual

Reducing Camera Shake and Blurring When
Taking Pictures (Digital SR Mode)
c (Digital SR mode) allows you to set the sensitivity higher than other
4
modes to reduce camera shake and blurring. Use this mode under the
shooting conditions that camera shake or blurring tends to occur.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select c
(Digital SR).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture status.
4
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
5
Press the shutter release button
fully.
The picture is taken.
When shooting mode is set to c, the sensitivity is automatically
adjusted between ISO XX – XX. (p.72) Shutter speed and aperture
are set automatically according to the selected sensitivity.
56
4, 5
1, 2
3
Available in c
02/02/2008 02/02/2008
19:25 19:25 19:25
38 38 38