Simple Login Settings - Kyocera ecosys M2735DW Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Simple Login Settings

The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
NOTE
• For user registration, refer to the following:
Adding a User (Local User List) (page 9-6)
• To use Simple Login, User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration (page 9-3)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
Enabling Simple Login
1
2
Simple Login Setup
You can add up to 20 users.
1
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login
password and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2735dw
ECOSYS M2640idw
2
[User Login Setting] > [Simple Login Settings] > [Simple Login]
Select [On] or [Off].
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login
password and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2735dw
ECOSYS M2640idw
2
[User Login Setting] > [Simple Login Settings] > [Simple Login Setup]
Login User Name
3500
4000
Login User Name
3500
4000
9-23
Login Password
3500
4000
Login Password
3500
4000