Enabling User Login Administration - Kyocera ecosys M2735DW Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration

Enabling User Login Administration

This enables user login administration. Select one of the following authentication methods:
Item
Local Authentication
Network Authentication
1
2
User authentication based on user properties on the local user list stored in the
machine.
User authentication based on Authentication Server. Use a user property stored
in Authentication Server to access the network authentication login page.
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login
password and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2735dw
ECOSYS M2640idw
2
[User Login Setting] > [User Login]
Configure the settings.
1
Select [Local Authentication] or [Network Authentication].
Select [Off] to disable user login administration.
If you select [Network Authentication], enter the host name (64 characters or less) and domain
name (256 characters or less) for the Authentication Server. Select [NTLM], [Kerberos] or [Ext.] as
the server type.
Ext.
When selecting [ ] as the server type, enter the port number.
NOTE
• Selecting [Domain] displays the domain registration list.
• Enter the domain name. Up to 10 domain names can be registered.
Descriptions
Login User Name
3500
4000
9-3
Login Password
3500
4000