Kyocera ecosys M2735DW Operation Manual page 369

Troubleshooting > Troubleshooting
C
Message
Cannot connect to
Authentication Server.
Cannot connect to
Server.
Cannot connect.
Cannot duplex print on
the following paper.
Cannot print the
specified number of
*1
copies.
Checkpoints
—
*1
—
—
—
—
―
Did you select a paper size/type
*1 that cannot be duplex printed?
—
Do you want to print the data stored
in the USB memory?
Corrective Actions
Set machine time to match the
server's time.
Check the domain name.
Check the host name.
Check the connection status with
the server.
Check the connection status with
the server.
This appears when the Wi-Fi or
Wi-Fi Direct connection did not
complete. Check the settings, and
check the signal conditions.
Select [Paper Selection] to select
the available paper. Select
[Continue] to print without using
Duplex function.
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Uncheck [RAM Disk] in the
[Device Settings] tab of the
printer's properties.
NOTE
If you unchecked the [RAM Disk],
check the [RAM Disk] again after
the printing is completed. If not,
print speed may be reduced.
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Reduce the number of copies to
be printed at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
• Select [Copy Priority] of
Optional Memory in System
Menu.
NOTE
Before changing the Optional
Memory setting, contact your
administrator.
10-19
Reference
Page
page 2-23
page 9-2
page 9-2
—
—
—
page 6-12
—