Table of Contents
Advertisement
Basic Operations
Recording to Removable Medium
The following procedure illustrates how to record two IDs to AIT/MO/PC card. The
procedure also illustrates how to attach an event mark to a desired location in the
data.
1.
From the File menu, choose New. The following window appears:
2
3
2.
From the directory tree, select TAPE or a folder in the MO or PC card. (In the
case of PC cards, the status display changes from NO MEDIA to DRIVE
READY at this point of time.) If the MO or PC card contains no folder, enter an
folder name in Directory Name.
3.
In Data Set Name, enter the filename using up to five characters.
4.
Click OK.
5.
Click the Rec Standby button (
The Activity area of the Status toolbar displays REC STANDBY, and the
Monitor area displays the input waveform.
6.
Click the Start button (
Recording starts, and the Number of IDs area in the Status toolbar displays the
number of the ID (001-000).
3-8
4
).
).
Before actual recording, set the recording con-
ditions following the steps illustrated in the
page 3-5.
NOTE
The files are closed just before the
ejection. The files are not closed if the
power failed with the AIT inserted.
Therefore, it is recommended that you
eject the AIT after every important
recording for an unexpected accident.
Waveform time axis during AIT recording
When the recording rate—sampling frequency
multiplied by number of channels—is 800 k
data/s or higher, the time axis is fixed to one
second.
Mouse response during recording to a
removable medium
The mouse pointer response is delayed when
using the provided software. Press the function
keys instead.
F5: Stop
F6: Rec Standby
F7: Start
F8: Event
You cannot record by overwriting data on a
removable medium. If a medium becomes full
(and you do not need the recorded data), refor-
mat the medium.
Advertisement
Table of Contents
