The Initial Window - Teac GX-1 Instruction Manual

Basic Operations
When the attached software "GX Navi" starts, the following window is displayed.
Main toolbar: Contains buttons for file operations and settings.
Status toolbar
Elapsed recording time
Current time (In reproducing, this area displays the
date and time when the recording was made.)
If the characters extend off the boxes, choose
Windows' Control Panel, Display, Settings
tab, and then select Small Fonts for Font size.
3-4

The Initial Window

Control toolbar: Contains buttons for recording/reproducing operations.
Monitor area:
Displays waveforms, FFT,
and bar graphs. Waveforms
and FFT can be from a maxi-
mum of 16 channels.
Activity Message
Window toolbar: Contains buttons for switching the display.
Control Panel:
Enables you to control
recording/reproducing and
to monitor activities.
Selects the monitored channel
Number of IDs:
Displays the number of IDs from the
start of recording. The number after the
hyphen is the number of event marks in
one ID. In reproducing, the number of
IDs is not displayed.
Exit software that eats a
lot of memory before
you run the "GX Navi".
Channel Select Palette:
Enables you to select
which channel is displayed
in waveform or FFT.