Operation Flow - Teac GX-1 Instruction Manual

From the initial window, follow the flow below.
Other procedures may cause malfunction.
File name/condition setting
File setting
[File]—[New]
(p. 3-22)
System setting
[Setup]—[System]
(p. 3-26)
Misc setting
[Setup]—[Misc]
(p. 3-31)
Params setting
[Setup]—[Params]
(p. 3-31)
Note:
Click OK on each setting submenu following the steps
above even if you want to change only one setting item. For
example, if you enter a new file name, do not start recording
at once but open submenus from the Setup menu and click
OK at each submenu.

Operation Flow

Initial Window
Recording
Select waveform
display
(p. 3-11)
Click
Rec Standby
(p. 3-6)
longer than 3 sec.
Click Start
Event mark writing
longer
Recording pause
than
3 sec.
Click Stop
Waveform display
of data in memory
Select waveform
display
(p. 3-11)
Basic Operations
Data transfer
after recording
Data transfer
[Edit]—[Copy]
(p. 3-25)
3-5