IBM pSeries 690 Service Manual page 203

Hide thumbs Also See for pSeries 690:

Table of Contents

Step 1322-16

Remove all entries in the list of all partition(s) you recorded in "Step 1322-11" on page 186. If you are

referred to the list of partition(s) obtained in "Step 1322-11" on page 186 in future steps, the list is empty.

Go to "Step 1322-17."

Step 1322-17

Select and highlight the service action event from the "Error Associated With This Serviceable Event"

Step 1322-18

Click Close Event.

Step 1322-19

Add comments for the serviceable event. Include any unique additional information. Click OK.

Step 1322-20

The following steps will add or update FRU information.

Step 1322-21

Did you replace, add, or modify a FRU of the open service action event?

Go to "Step 1322-23."

Go to "Step 1322-22."

Step 1322-22

From the FRU list, select a FRU that you need to update. Double-click on the FRU, and update the FRU

information. Go to "Step 1322-24."

Step 1322-23

Select the No FRU Replaced for this Serviceable Event option.

Step 1322-24

Click OK to close the service action event.

Step 1322-25

Is the list of all partition(s) you recorded in "Step 1322-11" on page 186 empty?

Go to "Step 1322-26."

Go to "Step 1322-33" on page 188.

Step 1322-26

Does the list of all partition(s) you recorded in "Step 1322-11" on page 186 contain more than one

Go to "Step 1322-33" on page 188.

Go to "Step 1322-27" on page 188.

Chapter 3. Maintenance Analysis Procedures