Jenn-Air SEG196 Use And Care Manual page 45

When necessary,follow these proceduresto remove appliance for creaningor
servicing:
1. Shut-offgas supplyto appliance.
2. Disconnectelectrical supplyto appliance.
3. Disconnectblower system.
4. Disconnectgas supplytubingto appliance.
5. Removescrewsthatsecure appliancetocabinetor floor. Remove appliancefrom
cabinet.
6. Reverse procedures to reinstall.
7. Test all jointsfor gas leaks with soap and water solution. NEVER USE A MATCH
OR OTHER FLAME TO LOCATE A GAS LEAK.
The accessdoor iseasily removedtoclean under
the rangeif necessary. To removedoor,pulldoor
downand lift offpivotpoints. To replacedoor,slide
door over pivot points; rift up and insert prongs into
holesin the range. -_-_/_
To avoidthe possibility of accidentally disconnect-
ingany part of the ventilationsystem, do not use
the area behindthe access doorfor storage.
45