Jenn-Air SEG196 Use And Care Manual page 42

To set oven to start cleaning at a later time:
An automaticprogramof 21/2hoursis presetfor an average soiled oven. For a
heavily soiled oven, program can be extended up to 4-hours.
a, Turn SET dial to desired start time.
b. Push ENTER button to enter START TIME. The indicator words STOP TIME
will appear in Display and the time will be 2V2hours later than the start time.
c. Foranaveragesoiledoven: PushENTERbuttontoenterstoptime. Theoven
will beep and the word AUTO will blink. When starttime is reached,the oven
will boep and the wordAUTO will remain in DisplayWindowduringthe cleaning
cycle.
For a heavily soiled oven: "rum set dial in a clockwisedirection to desired time
(maximum4 hourscleaningcycle). PushENTER buttontoenter stoptime. The
oven will beep and the wordAUTO will blink. When start time is reached,the
oven will beep and the word AUTO will remain in DispJay Window during the
cleaning process.
6. The oven CLEAN INDICATOR LIGHT will glow when all steps are completed
properly, except when set for a delayed start. The light goes off when stop time is
reached.
7. The cleaning process begins immediately unless the self-cleaning process has
been setfor a delayed start. When the oven temperature reaches 550°F, the LOCK
INDICATOR LIGHT will glow and the door cannot be opened until the temperature
drops below 550°F. DO NOT TRY TO UNLOCK THE DOOR WHILE LOCK
INDICATOR LIGHT IS ON. The normal cleaning process takes the time selected
on the clock plus about 45 minutes for the oven to cool down before the LOCK
INDICATOR LIGHT goes out and the door can be opened.
8. At end of time set, oven will stop automatically and not beep.
9. After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVER to
the left. The oven door can now be opened.
10. Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF after the
door is unlocked.
Important: IF THE TEMPERATURE KNOB IS TURNED TO OFF BEFORE THE
DOOR IS UNLOCKED, THE DOOR WILL NOT OPEN. Forcing the lock will
damage the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the
door, then turn TEMPERATURE knob OFF.
NOTE: A fan comeson wheneverthe SELECTOR knob is set on CLEAN; therefore, I
the fan will continueto operate at the end of the cleaningprocessuntil the _i
SELECTOR knobisturnedOFF. The fanwill alsostartas soonas thecontrols
I
. are set for a delayed start of the self-cleaning process.
L
TO check START TIME befor_cleaning begins: Hold in START TIME button until the
words START TIME appear in the Display Wlndow. The start time will be displayed
bdefly, then Display will return to time of day.
42