Jenn-Air SEG196 Use And Care Manual page 15

To achieve optimumcookingperformance,use cookpotswithfiat bottoms,tightfitting
covers,and sizedfor the surface burner.
Flame size should be adjusted so it does not extend beyond the edge of the cookware.
This instruction is based on safety considerations.Adjusting the size of the flame to fit
the size of the cookwarealso helpsto save fuel
Important: Leave a minimumof 1-1/2" between side of ¢ookpotand surrounding
surfaces,suchas countertop backsplash or sidewalls, to allowheatto escape to avoid
possibledamage to these areas,
• Aluminumcookware heats evenly and quickly. A slighfly largerflame size can be
used. The flamecan beadjustedso it comestothe edge ofthe cookware.However,
the flame shouldNEVER be adjustedso that it extendsbeyondthe bottomof the
cookware.
• Stainlesssteel cookwarewith copper or aluminumcores heat evenly and fairly
quickly.The flame size shouldbe adjustedto extend only halfwaybetween center
end edge of the cookwarebottom for best results.
• Cast ironcookwareheats slowly.
• Check manufacturer'srecommendations beforeusingpomelainon steel,porcelain
on cast iron,glass, glaas/ceramic,earthenware, or other glazed cookpots.
If the cookwareis covered, lessfuel will be needed; therefore,a lowerflame size can
be used.
Note: Food will not cook any faster when more than the amountof heat needed to
maintaina gentle boil is used.
15