Jenn-Air SEG196 Use And Care Manual page 10

To adjust surface burner air shutters (some models)
Loosenfasteningscrew with a phillipsscrew SURFACEBURNER ROTA3_AIR
AIR SHUTTER SHUTTER ON
driver and rotate air shutter to increase or MIXERHEADTO
SCREW MAKE AIR
decrease thesizeoftheairopening. As the "x",_
2_ _STMEm
shutter is turned observe change in flame _._ _'AIAIRSHUTFER
appearance. Adjustmentis satisfactory when Q _..O_
AIR OPEMNG"_O_j=l_ TO
a clearly defined,even blue flame results at AIROPEMN CLOSE
the Hi flamesetting. Afteradjustment, t ighten
screw.
TO adjust grill burner air shutters and surface burner air shutters
(some models)
The left handair shuttercontrols the rearhalf ofthe grillburneror therear surfaceburner.
The righthandshuttercontrols thefronthalfof the grillburnerorthe frontsurfaceburner.
Slide air shutter backward or forward to
in-
__GRILLBURNERAIRSHUTFER
creaseor decreasethe size ofthe air opening. _'_ _ 'q_,.
Air shutters fit snugly on the burner, so a
screwdriverblade may be requiredto make
AIROPENING_
this adjustment. Observe change in flame A_RSHUWER_ _.,_'=
INSERT SCREWDRIVER BLADE
appearance asthe air shutter is moved. Ad- _NSLO'rANDrA'ISTWITH
SLIGP;3"PRESSURE TO ALLOW
justment is satisfactorywhen a clearly de- AIRSHt/TI3ERTOSLIDEEASIL%
fined, even blue flame resultsat the HI flame
setting. The snugfit of the air shutterassures
it willremain positionedcorrectly.
On any burner,closingthe air shuttertoo far will cause the flame to become soft and
yellowtipped. Openingthe air shuttertoo widewill causethe flame to blowaway from
the burner ports. Properadjustmentwill producea sharp, clearlydefined,even, blue
flame.
This appliance has been shippedfrom the factory with Lo and Med flame settings
adjustedfor use with naturalgas and average installations.There is a wide variety of
conditions causedby altitudeandgas mixtures controlled byutility companies,whichwill
vary and affect the gas flame and performance. Adjustmentsshouldbe made at time
of installation. If conditionschange, followthe proceduresoutlinedto adjustthe Lo
setting.
10