POS interfaces channelized from the local E-CPOS interface are not the same as POS interfaces
•
channelized from the remote E-CPOS interface in POS interface number.
PPP authentication fails on the virtual POS interface. PPP authentication might fail due to incorrect
•
PPP authentication parameters.
You can use the display interface pos interface-number command to display the multiplexing path and
PPP link negotiation information of the specified POS interface.
Depending on the device model, an interface can be in one of the following states:
Pos2/0/0/1:0 current state: Administratively DOWN, Line protocol current state: DOWN,
•
indicating that the interface is administratively shut down.
Pos2/0/0/1:0 current state: DOWN, Line protocol current state: DOWN, indicating that the
•
interface is not enabled or has not gone up on the physical layer.
Pos2/0/0/1:0 current state: UP, Line protocol current state: UP, indicating that the interface has
•
passed LCP negotiation.
Pos2/0/0/1:0 current state: UP, Line protocol current state: DOWN, indicating that the interface
•
has been activated but has not passed LCP negotiation.
82