HP HSR6800 Configuration Manual page 82

Step
4. Configure the 622 Mbps
E-CPOS interface to operate in
channelized mode.
5. Create a 155 Mbps channel
and enter its view.
6. Configure the 155 Mbps
channel to operate in
concatenated mode
Configuring the interface/channel operating mode on a 622 Mbps E-CPOS interface
Use the using command to configure a 622 Mbps E-CPOS interface to operate in channelized mode or
concatenated mode. To create POS channels, configure the concatenated mode. On a 622 Mbps
E-CPOS interface in concatenated mode, you can create four 155 Mbps or one 622 Mbps POS interface.
1. Configure the operating mode of a 622 Mbps E-CPOS interface
To configure the operating mode of a 622 Mbps E-CPOS interface:
Step
1. Enter system view.
2. Enter 622 Mbps E-CPOS
interface view.
3. Configure the interface to
operate in concatenated
mode.
2. Create a 155 Mbps POS channel and configure its operating mode
To create a 155 Mbps POS channel and configure its operating mode on a 622 Mbps E-CPOS
interface:
Step
1. Enter system view
2. Enter 622 Mbps E-CPOS
interface view
3. Create a 155 Mbps channel
and enter its view
4. Configure the 155 Mbps
channel to operate in
concatenated mode
Command
using oc-12
oc-3 oc-3-number
using oc-3c
Command
system-view
controller e-cpos interface-number
using oc-12c
Command
system-view
controller e-cpos interface-number
oc-3 oc-3-number
using oc-3c
77
Remarks
Optional.
By default, a 622 Mbps E-CPOS
interface operates in channelized
mode.
Before creating a 155 Mbps POS
channel, you must configure the 2.5
Gbps E-CPOS interface to operate in
channelized mode. However,
because a 2.5 Gbps E-CPOS interface
operates in channelized mode by
default, you can skip this step.
N/A
The default is the channelized mode.
Remarks
N/A
N/A
The default is the channelized
mode.
Remarks
N/A
N/A
N/A
Optional.
The default is the channelized
mode.