User Ras Pin; Cli Numbers - Bosch solution 6000 Installation Manual

Comms > Remote Access >

CLI Numbers

1
First
Number
1
Second
Number
1
Third
Number
CLI Numbers (Call Line Identification) allows the control
panel to answer an incoming call only when the control
panel identifies that the incoming call is from any one of
the three CLI numbers programmed. Up to three different
CLI telephone numbers can be programmed, each having
a maximum of 32 digits.
1) Enter [MENU] + [5] + [3] + [7]. The keypad will
display the following:
Phone 1=
Phone 2=
Phone 3=
Press  OK or MENU
2) Highlight the telephone number that you want to
program for CLI number, then press [OK] to select.
CLI Numbers Phone 1
Press  0-9 OK to SAVE
3) Using the numeric keys, enter the telephone
number that you wish to program.
4) Press [OK] to save and return to the MENU.
Up to 3 Phone numbers can be entered for CLI Call
i
Line Identification for remote access detection. You
Note
must enter STD code plus the compete number for
this option to work. Press [OK] after each telephone
number is entered to save and move to the next
number.
The control panel is only required to match part
i
of the CLI telephone number programmed to the
Note
number of the incoming call.
Example
If the programmed CLI telephone number is
0296721777, the control panel would only be
required to match part of the telephone number (eg.
96721777) to answer the incoming call.
Bosch Security Systems 07/14 BLCC610I
 MENU 5-3-7
Digits
Digits
Digits
Solution 6000
Comms > Remote Access >

User RAS PIN

32
Use keys 0 - 9 to program user RAS PIN + [OK] tosave.
32
1) Press [MENU] + [5] + [3] + [8]. The keypad will
display the current Transmission Format for
Destination 2.
32
User RAS PIN
00000000
Press 0-9 OK to SAVE
2) Use the numeric keys to program the user RAS PIN
required, then press [OK] to save and exit, or press
[MENU] to exit without saving.
Installation Manual Comms Programming
 
0 0 0 0
MENU 5-3-8
0 0 0 0
9-13