Workflow; Auto Load In 3D And Postprocessing Presets - Siemens SOMATOM Emotion 6 Application Manual

General

Workflow

Auto Load in 3D and Postprocessing Presets

You can activate the "Auto load in 3D" function on the
Examination Card/Auto Tasking and link it to a recon
job. For example, the 2 nd recon job with thinner slice
width in some of the examination protocols. If the post-
processing type is chosen from the pull down menu,
the reconstructed images will be loaded automatically
into the 3D Card on the Navigator with the correspond-
ing postprocessing type.
On the 3D Card you have the possibility to create MPR,
MIPthin Range Parallel and Radial protocols which can
be linked to a special series.
For example, if you always do sagittal Multiplanar
Reconstructions for a Spine examination, you load once
a Spine examination into the 3D Card. Select the image
type (MPR, MIPthin), select the orientation and open
the Range Parallel function. Adapt the range settings
(Image thickness, Distance between the images etc.)
and hit the link button. From that point on, you have a
predefined postprocessing protocol, linked to the series
description of a Spine examination.
Exactly the same can be done for VRT presets. In the
main menu, under Type/VRT Definition, you can link
VRT presets with a series description.
19