Stacker Position Adjustment; Stacker Label Width Adjustment - Paxar 545 User Manual

Stacker Position Adjustment

Stacker Label Width Adjustment

Users Manual Model 545™
•
Once the web has been centered in the printer or it has stabilized from running,
confirm that equal numbers of belts exist on either side of the fabric, and that
the spacing to the nearest belt is the same on each side. This is achieved by
loosening the stacker mount screw and moving the stacker forward or back
accordingly.
•
Slide the left and right spring loaded upright rails to the desired position.
Printer Operation / Adjustments • 29