Reference Connections For Permanent Links With Unpinned Mtp/Mpo Connectors - Fluke MultiFiber Pro User Manual

A
Use one TRC to set the
reference.
B
Disconnect TRC 1 from
the meter, then connect
cord 2 to the meter.
Figure 8. Reference Connections for Permanent Links with Unpinned MTP/MPO Connectors
Type B
TRC 1
Pinned/Pinned
Meter
Type B
TRC 2
Pinned/Pinned
Meter
How to Measure Loss
W
Caution
Do not disconnect TRC 1
from the source after
you set the reference.
Source
Type B
TRC 1
Pinned/Pinned
Source
GUE19.EPS
21