How To Use The Oneclick Cleaner For Mtp/Mpo Connectors - Fluke MultiFiber Pro User Manual

MultiFiber Pro Optical Power Meter and Fiber Test Kits
Users Manual
1 To clean a bulkhead connector, remove the cap from the
cleaner. To clean the connector on a fiber cable, remove
only the tip of the cap. See Figure 5.
2 Push the cleaner into the connector, then turn the dial
on the cleaner until you hear a loud click. Then remove
the cleaner.
3 Use a fiber microscope, such as the FT600
FiberInspector ™ Mini Video Microscope, to inspect the
connector. If necessary, clean and inspect the connector
again.
14
Remove the
guide cap
A
Guide cap
Figure 5. How to Use the OneClick Cleaner for
MTP/MPO Connectors
CLICK!
CLICK!
B
GUE01.EPS