Fluke MultiFiber Pro User Manual page 9

W
Warning: Class 1 Laser
To prevent possible eye damage caused by
hazardous radiation:
•
Do not look directly into optical connectors. Some
optical equipment emits invisible radiation that can
cause permanent damage to your eyes.
•
Do not turn on the source unless a fiber is attached
to the port.
•
When you inspect fiber endfaces, use only
magnification devices that have the correct filters.
•
Do not open the case, except to change the
batteries; no user-serviceable parts are inside.
•
Use of controls, adjustments, or procedures not
stated herein can possibly result in hazardous
radiation exposure.
•
If this equipment is used in a manner not specified
by the manufacturer, the protection provided by
the equipment can possibly be impaired.
*
•
•
•
•
W
Caution
To prevent damage to fiber connectors, to
prevent data loss, and to ensure maximum
accuracy of test results:
Use proper cleaning procedures to clean all fiber
connectors before every use. Neglecting this step
or using improper procedures can cause unreliable
test results and may permanently damage the
connectors.
Cover all connectors with protective caps when not
in use.
Do not connect the source to an active network.
Doing so can disrupt network operations.
To prevent unreliable test results, replace the
battery as soon as the low battery icon appears.
Safety Information
3