Optional Accessories Requirements - Majestic MDVI30IN Installation Manual

C. Optional Accessories Requirements
• This appliance may be used with a wall switch, wall
mounted thermostat, and/or a remote control. A factory
-installed fan comes standard with the MDVI30IN/IL and
MDVI35IN/IL.
• To connect optional accessories, the supplied cord
assembly should be used.
Wiring for optional Hearth & Home Technologies approved
accessories should be done now to avoid reconstruction.
Follow instructions that come with those accessories.
• Plug the cord into a convenient outlet.
• Must use cord supplied.
TO CORD ASSEMBLY
120VAC
ORANGE
BLK
BLK
Figure 8.1 Intellifi re Plus Pilot Ignition (IPI) Wiring Diagram and Fan Wiring Diagram
TM
Majestic • MDVI30IN, MDVI35IN, MDVI30IL, MDVI35IL Installation Manual • 2205-980 Rev. H • 12/16
INTERMITTENT PILOT IGNITOR
MODULE
ORG
WHT
AUX WIRE EXTENSION
BLACK
GREEN
RED
(PILOT) (MAIN)
BROWN
GROUND
GROUND
PLUG INTO 120V
EXISTING OUTLET
DC REGULATOR
RECEPTICLE
AUX 200 MODULE
TO CONTROL
MODULE
BLOWER
RECEPTICLE
• An IntelliFire™ Plus Wireless Controls or WSK-21
wired wall switch may be used with the IntelliFire™
Plus Ignition System. Hearth & Home Technologies
recommends that IntelliFire Plus™ wireless controls be
used for their features and functionality with the Intel-
liFire™ Plus ignition system.
• A standard ON/OFF switch is compatible.
WARNING! Risk of Shock! Label all wires prior to dis-
connection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper
operation after servicing.
WARNING! Risk of Shock! Replace damaged wire with
type 105° C rated wire. Wire must have high temperature
insulation.
RC200
AUX200
MODULE
BATTERY PACK
6V DC (AA X 4)
EMC FILTER UNIT
FAN
FAN
TO CORD ASSEMBLY
120VAC
EMBER BULB 50W (2)
BLK
WHT
GRN GRN
BLK BLK
BLOWERS
FUSE WIRE
ASSEMBLY
FUSE WIRE
ASSEMBLY
BLK
BLK
GRN
GRN
WHT
BLK
19