Optional Accessories; Remote Controls; Zero Clearance Kit; A Trim Options For Rhedv25 - Majestic RHEDV25 Installation Instructions & Homeowner's Manual

Vermont Castings, Majestic Products RHEDV Direct Vent Insert

Remote Controls

Optional remote control units are available to control
different functions of the appliance.
Model Function(s) Controlled
MRC1 ON/OFF
MRC2 ON/OFF and Temperature
MRC3 ON/OFF and Temperature control
with a digital and a programmable
24 hour clock
IMT Wall mounted thermostat control

Zero Clearance Kit

For installations other than in existing woodburning
fireplaces such as new construction or renovation
projects, a Zero Clearance Kit must be used. The
HEZC enables these inserts to be installed in combusti-
ble environments. It is recommended that an Air Kit
(AKZC) be installed whenever using a Zero Clearance
Kit. Consideration must be given to the dimensions of
the Zero Clearance Kit and the requirements of the Air
Kit when planning out the installation.
Follow the instructions supplied with the Zero Clear-
ance Kit carefully for proper installation.
22

Optional Accessories

For use with RHEDV25
RHE25SSP
1. Install trim channels (left and right sides). Use two
2. Slide on the trim top channel and fasten it from the
3. Install the trim top deflector using two screws.
4. Remove ALL plastic protective covering from brass
Fig. 27 Trim top deflector.
HE25LP
1. To install the kit you do not have to remove any
2. Remove the frame trim from the unit if it is already
3. Install trim channels (left and right sides) by remov-
4. Slide on the trim top channel and fasten it from the
5. Remove the two screws that hold the top brass trim.
6. Install the two brackets to the studs in the bottom of

A Trim Options for RHEDV25

A1 RHE25SSP, HE25LP Trims
RHE25SSP Small surround, black with thin polished
brass edge
HE25LP Large polished brass edge (to be used
with RHE25SSP)
Trim Assembly
screws to assemble each piece.
back side.
trim.
Trim Top Deflector
Side View
piece of brass, you just add the external pieces.
installed.
ing the two screws that hold the side brass trim and
put them back to hold both parts.
back side.
the top channel. Use the nuts supplied with top trim
channel.
A flat louvre kit OR a bay window kit need
to be chosen to complete the installation.
Trim Frame Top
Section
FP1261a
10000801