Majestic MDVI30IN Installation Manual page 26

Log #2 (SRV2219-704): Note the location of the log pin placement holes on the bottom of Log #2, shown in Figure 6. Position
Log #2 by placing over the two log pins located on the surface of the burner. Figure 7 shows Log #2 installed.

Figure 6. Log #2 Detail
Log #3 (SRV2219-703): Note the location of the log pin placement hole and grate tine groove on the bottom of Log #3.
See Figure 8. Position Log #3 as shown in Figure 9 by mating the hole on the bottom of Log #3 with the last log pin on the
surface of the burner, adjusting placement on the grate tine as necessary for correct orientation.
GRATE TINE GROOVE GRATE TINE GROOVE
Figure 8. Log #3 Detail
Log #4 (SRV2219-702): Note the fl at areas on Log #1 and Log #2 highlighted in Figure 7. Position Log #4 by placing the
left end of the log fully into the fl at spot on Log #1 and then setting the other end of Log #4 in the fl at spot on Log #2. See
Figure 11.
Figure 10. Log #4 and Log #5
26
Majestic • MDVI30IN, MDVI35IN, MDVI30IL, MDVI35IL Installation Manual • 2205-980 Rev. H • 12/16
LOG PIN HOLES LOG PIN HOLES
LOG PIN HOLE LOG PIN HOLE
LOG #4 LOG #4
LOG #5 LOG #5
1 1
Figure 7. Log #2 Installed
FLAT AREAS FOR FLAT AREAS FOR
LOG #5 LOG #5
1 1
3 3
LOG GROOVE CONTACTS GRATE TINE LOG GROOVE CONTACTS GRATE TINE
Figure 9. Log #3 Installed
3 3
Figure 11. Log #4 Installed
FLAT AREAS FOR LOG #4 FLAT AREAS FOR LOG #4
2 2
FLAT AREA FOR LOG #6 FLAT AREA FOR LOG #6
2 2
4 4
1 1
2 2