Siemens SINAMICS V90 Operating Instructions Manual page 307

Par. No. Name
r0030 Current actual value torque-generating smoothed
Description: Displays the smoothed torque-generating actual current.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque-generating current actual value is available smoothed.
r0031 Actual torque smoothed
Description: Displays the smoothed torque actual value.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque actual value is available smoothed (r0031) and unsmoothed.
r0032 Active power actual value smoothed
Description: Displays the smoothed actual value of the active power.
r0033 Torque utilization smoothed
Description: Displays the smoothed torque utilization as a percentage.
The torque utilization is obtained from the required smoothed torque in reference to the torque limit, scaled
using p2196.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque utilization is available smoothed (r0033) and unsmoothed.
For M_set total (r0079) > M_max offset, the following applies:
demanded torque = M_set total - M_max offset
•
actual torque limit = M_max upper effective - M_max offset
•
For M_set total (r0079) <= M_max offset (p1532), the following applies:
demanded torque = M_max offset - M_set total
•
actual torque limit = M_max offset - M_max lower effective
•
For the actual torque limit = 0, the following applies: r0033 = 100 %
For the actual torque limit < 0, the following applies: r0033 = 0 %
r0034 Motor utilization thermal
Description: Displays the motor utilization from motor temperature model 1 (I
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2015, A5E36037884
Parameters
10.2 Parameter list
Unit Data type
Arms Float
Nm Float
kW Float
% Float
% Float
t) or 3.
2
307