Table of Contents
Advertisement
Driving Position Memory System
Selecting a Memorized Position
To select a memorized position, do
this:
1. Make sure the shift lever is in
Park.
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
The system will move the seat,
steering wheel, and outside mirrors
to the memorized positions. The
indicator in the selected memory
button will flash during movement.
When the adjustments are complete,
you will hear two beeps, and the
indicator will remain on.
To change the ''MEMORY
POSITION LINK'' setting, see page
115.
182
To stop the system's automatic
adjustment, do any of these actions:
Press any button on the control
●
panel: SET, 1, or 2.
Push any of the adjustment
●
switches for the seat or steering
wheel.
Shift out of Park.
●
Adjust the outside mirrors.
●
If desired, you can use the
adjustment switches to change the
positions of the seat, steering wheel
or outside mirrors after they are in
their memorized position. If you
change the memorized position, the
indicator in the memory button will
go out. To keep this driving position
for later use, you must store it in the
driving position memory.
2010 ZDX
Advertisement
Table of Contents
