Table of Contents
Advertisement
Additional Information About Your Seat Belts
If either the driver or a front
passenger does not fasten their seat
belt while driving, the beeper will
sound and the indicator will flash
again at regular intervals.
You will also see a ''FASTEN SEAT
BELT'' or ''FASTEN PASSENGER
SEAT BELT'' message on the multi-
information display (see page 90).
When no one is sitting in the front
passenger's seat, or a child or small
adult is riding there, the indicator
should not come on and the beeper
should not sound.
ꭧ:Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON mode is the equivalent of
ON (II). For more information, see
pages
194
and 196.
22
If the indicator comes on or the
beeper sounds when the driver's seat
belt is latched and there is no front
seat passenger and no items on the
front seat, something may be
interfering with the monitoring
system. Look for and remove:
Any items under the front
●
passenger's seat.
Any object(s) hanging on the seat
●
or in the seat-back pocket.
Any object(s) touching the rear of
●
the seat-back.
If no obstructions are found, have
your vehicle checked by a dealer.
2010 ZDX
Lap/Shoulder Belt
The lap/shoulder belt goes over your
shoulder, across your chest, and
across your hips.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page
16
for how to
properly position the belt).
To unlock the belt, press the red
PRESS button on the buckle. Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
Advertisement
Table of Contents
