Installing A Child Seat With Latch - Acura 2010 ZDX Owner's Manual

Installing a Child Seat with
LATCH
Your vehicle is equipped with
LATCH (Lower Anchors and Tethers
for CHildren) at the outer rear seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
BUTTON
LOWER ANCHORS
To install a LATCH-compatible child
seat:
1. Move the seat belt buckle or
tongue away from the lower
anchors.
2. Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
2010 ZDX
Installing a Child Seat
HEAD RESTRAINT
REAR HEAD RESTRAINT TILT BUTTON
3. Push the rear head restraint tilt
buttons on the head restraints to
pivot the head restraints down.
CONTINUED
49