Table of Contents
Advertisement
To use the heaters, press the seat
heater button. The indicator (red)
next to the button will come on.
There are four settings in the
heaters:
HI － Three indicators on.
MID － Two indicators on.
LO － One indicator on.
OFF － All indicators off.
When you press the seat heater
button once, the heater is set to HI.
After the seat reaches a comfortable
temperature, select MID or LOW by
pressing the seat heater button. This
will keep the seat warm. To shut
down the heater, press the seat
heater button until the indicators go
off.
Front Seat Heaters and Seat Ventilation
To ventilate the seat, press the seat
ventilation button. The indicator
(blue) next to the button will come
on. The air ventilation system has
four settings:
HI － Three indicators on.
MID － Two indicators on.
LO － One indicator on.
OFF － All indicators off.
When you press the seat ventilation
button once, the system is set to HI.
To change to the lower mode, press
the seat ventilation button. To turn
the air ventilation off, press the seat
ventilation button until the indicators
go off.
2010 ZDX
Follow these precautions whenever
you use the seat heaters and the seat
ventilation:
Use the HI setting only to heat or
●
to ventilate the seats quickly,
because it draws large amounts of
current from the battery.
If the engine is left idling for an
●
extended period, do not use the
seat heaters or the seat ventilation,
even on the LO setting. It can
weaken the battery, causing hard
starting.
A multi-information display message
may inform you when the battery
charge is getting low. See page
more information.
85
for
169
Advertisement
Table of Contents
