Collision Mitigation Braking System™ (CMBS™)
CMBS OFF Button
CMBS OFF BUTTON
To turn the CMBS off, press the
CMBS OFF button under the driver's
side vent for about 1 second. When
you do this, a beeper sounds, a
CMBS indicator on the instrument
panel comes on, and a CMBS OFF
message appears on the multi-
information display. To turn the
system back on, press the button
again for about 1 second.
502
When you select the ON mode by
operating the engine start/stop
button (see page 194), the CMBS is
turned on if it was on previously.
2010 ZDX
Automatic Shut Off
Any of the conditions below can
cause the CMBS to shut off. When
the system shuts off, the CMBS
indicator in the instrument panel
comes on, and a CHECK CMBS
SYSTEM message appears on the
multi-information display for about 5
seconds.
An abnormal tire condition is
●
detected (wrong tire size, flat tire,
etc.).
Extended off-road or mountainous
●
driving.
Driving your vehicle with the
●
parking brake applied.
Driving your vehicle in bad
●
weather (rain, fog, snow, etc.).
A dirty radar sensor cover on the
●
front grille.
The CMBS will automatically recover
when these conditions are improved.