Adjusting The 4-Way Lumbar Sup Port - Mercedes-Benz SLC Operator's Manual

Seats
84
Adjusting the seats manually
Seat fore-and-aft adjustment: lift lever :
X
and slide the seat forwards or backwards.
Release lever : again.
X
Make sure that you hear the seat engage in
position.
To adjust the backrest angle: relieve the
X
pressure on the backrest.
Pull handle ; and move backrest to the
X
desired angle.
Release handle ; again.
X
The backrest must audibly engage.
To adjust the seat height: pull handle =
X
upwards or push it down repeatedly until the
seat has reached the desired height.
Adjusting the seats electrically
Backrest angle
:
Seat fore-and-aft adjustment
;
Seat cushion angle
=
Seat height
?
i
You can store the seat settings using the
memory function ( page 91).
Y
Adjusting the head restraints
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
adjust the driver's seat, head restraint,
R
steering wheel or mirrors
fasten the seat belt
R
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
To raise/lower: push the head restraint
X
upwards or pull it down into the desired posi-
tion.
Adjusting the 4-way lumbar support
Raises the backrest contour
:
Softens the backrest contour
;
Lowers the backrest contour
=
? Hardens the backrest contour