Mercedes-Benz SLC Operator's Manual page 145

Hide thumbs Also See for SLC:
Table of Contents

Advertisement

Activating
Briefly pull the cruise control lever towards
X
you ?, up : or down ; .
Distance Pilot DISTRONIC is activated.
To adjust the set speed in 1 mph incre-
X
ments (1 km/h increments): briefly press
the cruise control lever up : to the pressure
point for a higher speed, or down ; for a
lower speed.
Every time the cruise control lever is pressed
up or down, the last speed stored is increased
or reduced.
or
To adjust the set speed in 5 mph incre-
X
ments (10 km/h increments): briefly press
the cruise control lever up : past the pres-
sure point for a higher speed, or down ; for
a lower speed.
Every time the cruise control lever is pressed
up or down, the last speed stored is increased
or reduced.
Remove your foot from the accelerator pedal.
X
Your vehicle adapts its speed to that of the
vehicle in front, but only up to the desired
stored speed.
i
If you do not fully release the accelerator
pedal, the
Distance Pilot passive
sage appears in the multifunction display. The
set distance to a slower-moving vehicle in
front will then not be maintained. You will be
driving at the speed you determine by the
position of the accelerator pedal.
You can also activate Distance Pilot DISTRONIC
when stationary. The lowest speed that can be
set is 20 mph (30 km/h).
Activates at the current speed/last
stored speed
G
WARNING
If you call up the stored speed and it differs
from the current speed, the vehicle acceler-
ates or decelerates. If you do not know the
stored speed, the vehicle could accelerate or
brake unexpectedly. There is a risk of an acci-
dent.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
Briefly pull the cruise control lever towards
X
you ?.
Remove your foot from the accelerator pedal.
X
The first time Distance Pilot DISTRONIC is
activated, it stores the current speed or reg-
ulates the speed of the vehicle to the previ-
ously stored speed.
Pulling away and driving
If you want to pull away with Distance
X
Pilot DISTRONIC: remove your foot from the
brake pedal.
Briefly pull the cruise control lever towards
X
you ?.
or
If Distance Pilot DISTRONIC is activated:
X
accelerate briefly.
Your vehicle pulls away and adapts its speed
to that of the vehicle in front. If no vehicle is
detected in front, your vehicle accelerates to
the set speed.
The vehicle can also pull away when it is facing
an unidentified obstacle or is driving on a differ-
ent line from another vehicle. The vehicle then
brakes automatically. Be ready to brake at all
times.
If there is no vehicle in front, Distance Pilot
mes-
DISTRONIC operates in the same way as cruise
control.
If Distance Pilot DISTRONIC detects a slower-
moving vehicle in front, it brakes your vehicle. In
this way, the distance you have selected is main-
tained.
If Distance Pilot DISTRONIC detects a faster-
moving vehicle in front, it increases the driving
speed. However, the vehicle is only accelerated
up to the speed you have stored.
Selecting the drive program
Distance Pilot DISTRONIC supports a sporty
driving style when you have selected the S or S+
drive program (
behind the vehicle in front or to the set speed is
then noticeably more dynamic. If you have
selected the C or E driving program, the vehicle
accelerates more gently. This setting is recom-
mended in stop-and-start traffic.
Driving systems
page 121). Acceleration
Y
143
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents