Mercedes-Benz SLC Operator's Manual page 91

Hide thumbs Also See for SLC:
Table of Contents

Advertisement

Make sure that the SmartKey is in position 1
X
or 2 in the ignition lock.
Press button : for the left exterior mirror or
X
button ; for the right exterior mirror.
The indicator lamp in the corresponding but-
ton lights up in red.
The indicator lamp goes out again after some
time. You can adjust the selected mirror using
adjustment button = as long as the indicator
lamp is lit.
Press adjustment button = up, down, to the
X
right or to the left.
The exterior mirror must be set to a position
that provides you with a good overview of
traffic conditions.
The convex exterior mirrors provide a larger field
of vision.
The exterior mirrors are automatically heated
after starting the vehicle if the rear window
defroster is switched on and the outside tem-
perature is low. Mirror heating lasts up to 10
minutes.
i
You can also heat up the exterior mirrors
manually by switching on the rear window
defroster.
Folding the exterior mirrors in or out
electrically
Make sure that the SmartKey is in position 1
X
or 2 in the ignition lock.
Briefly press button :.
X
Both exterior mirrors fold in or out.
i
Make sure that the exterior mirrors are
always folded out fully while driving. They
could otherwise vibrate.
Folding the exterior mirrors in or out
automatically
If the "Fold in mirrors when locking" function is
activated in the on-board computer
(
page 174):
Y
the exterior mirrors fold in automatically as
R
soon as you lock the vehicle from the outside.
the exterior mirrors fold out again automati-
R
cally as soon as you unlock the vehicle and
then open the driver's or front-passenger
door.
i
The exterior mirrors do not fold out if they
have been folded in manually.
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
Vehicles without electrically folding exte-
X
rior mirrors: move the exterior mirror into
the correct position manually.
Vehicles with electrically folding exterior
X
mirrors: press and hold mirror-folding button
until you hear the mirror click into place
(
page 89).
Y
The mirror housing is engaged again and you
can adjust the exterior mirrors as usual
(
page 88).
Y
Mirrors
89
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents