Adjusting The 4-Way Lumbar Sup Port - Mercedes-Benz 2013 C-Class Coupe Owner's Manual

Seats
108
This makes it easier for passengers to get into
and out of the rear compartment. The head
restraint also lowers on vehicles with electric
seat adjustment.
X
Vehicles without memory function:
release the head restraint if necessary and
push it down.
X
Pull seat release handle : forwards and
fold the backrest forwards until the seat
backrest engages.
X
Push the seat as far forwards as it will go.
X
Vehicles with memory function: pull seat
release handle : forwards and fold the
backrest forwards as far as it will go.
The seat moves automatically to the fore-
most position.
Folding back the seat backrest
X
Vehicles without memory function:
push the seat backrest back horizontally
until the seat reaches the position that was
previously set.
X
Fold the seat backrest backwards until you
hear it engage. Do so in a smooth manner.
X
After the seat backrest has been folded
back, check the position of the head
restraint and set it to the correct position.
X
Vehicles with memory function: swing
back the seat backrest.
The seat moves automatically to the stored
position.
Adjusting the 4-way lumbar support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
To raise the backrest contour
:
To soften the backrest contour
;
To lower the backrest contour
=
To harden the backrest contour
?
Switching the seat heating on/off
Switching on/off
G
WARNING
If you repeatedly switch on seat heating, the
seat cushion and backrest padding may
become very hot. The health of vehicle occu-
pants with limited temperature sensitivity or
a limited ability to react to excessively high
temperatures may be affected or they may
even suffer burn-like injuries. There is a risk
of injury.
Therefore, do not switch on the seat heating
repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i If the battery voltage is too low, the seat
heating may switch off.