Display Message - Mercedes-Benz SLC Operator's Manual

Hide thumbs Also See for SLC:
Table of Contents

Advertisement

Display messages
198
Display messages
Tire Pressure Moni‐
tor Inoperative No
Wheel Sensors
Tire Press. Monitor
Inoperative
Vehicle
Display messages
Shift to 'P' or 'N'
to Start Engine
Apply Brake to
Shift from 'P'
To Shift out of P
or N, Depress Brake
and Start Engine
Risk of Rolling
Away Vehicle Not in
'P'
Only Shift to 'P'
when Vehicle is Sta‐
tionary
Apply Brake to
Select R
Possible causes/consequences and M Solutions
The wheels mounted do not have a suitable tire pressure sensor. The
tire pressure monitor is deactivated.
Mount wheels with suitable tire pressure sensors.
X
The tire pressure monitor is activated automatically after driving for
a few minutes.
The tire pressure monitor is faulty.
Visit a qualified specialist workshop.
X
Possible causes/consequences and M Solutions
You have attempted to start the engine with the transmission in posi-
tion R or D.
Shift the transmission to position P or N.
X
You have attempted to move the transmission selector lever to posi-
tion D, R or N without depressing the brake pedal.
Depress the brake pedal.
X
With the engine switched off, you have attempted to shift the trans-
mission out of position P or N into another transmission position.
Depress the brake pedal.
X
Start the engine.
X
The driver's door is not fully closed and the transmission is in position
R, N or D.
A warning tone also sounds.
G
WARNING
The vehicle may roll away.
There is a risk of an accident.
When parking the vehicle, shift the transmission to position P.
X
The vehicle is moving.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
Shift the transmission to position P.
X
You attempted to shift from position D to position R.
Depress the brake pedal.
X
Shift the transmission to position R.
X

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents