Nautilus T624 Service Manual page 59

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet
!
and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure
location.
Note: The Nautilus™ T626 is used in the following images. The procedure
is the same for the Nautilus™ T624/T684/T686 and Schwinn
models.
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
2. Using a #2 Phillips screwdriver remove the 4 indicated screws, and two
additional screws on the far side, from the Motor Cover and remove it.
3. Using a #2 Phillips screwdriver remove the 2 indicated screws from the
MCB Cover and remove it.
4. Release the Securing Clips from the Power Inlet and remove it from the
Frame.
530/570
®
59
Motor Cover
MCB Cover
Power Inlet
Power
Inlet