Mazda 2 2015 Owner's Manual page 572

Taking Action
Take the appropriate action and verify that the warning light turns off.
Signal
The light turns on when the remaining fuel is
about 9.0 L (2.3 US gal, 1.9 Imp gal).
NOTE
Low Fuel
The light illumination timing may vary
Warning Light
because fuel inside the fuel tank moves
around according to the driving conditions
and the vehicle posture.
The seat belt warning light turns on if the
driver or front passenger's seat is occupied
and the seat belt is not fastened with the
ignition switched ON.
If the driver or front passenger's seat belt is
unfastened (only when the front passenger
seat is occupied) and the vehicle is driven at
a speed faster than about 20 km/h (12 mph),
the warning light fl ashes. After a short time,
the warning light stops fl ashing, but remains
illuminated. If a seat belt remains unfastened,
the warning light fl ashes again for a given
period of time.
NOTE
Seat Belt
Warning Light
(Front seat)
Warning/Indicator Lights and Warning Sounds
Warning
If the driver or front passenger's seat
belt is unfastened after the warning light
turns on, and the vehicle speed exceeds
20 km/h (12 mph), the warning light
fl ashes again.
Placing heavy items on the front
passenger's seat may cause the front
passenger's seat belt warning function
to operate depending on the weight of
the item.
To allow the front passenger's seat
weight sensor to function properly, do
not place and sit on an additional seat
cushion on the front passenger's seat.
The sensor may not function properly
because the additional seat cushion
could cause sensor interference.
If a small child is seated on the front
passenger's seat, the warning light may
not operate.
Action to be taken
Add fuel.
Fasten the seat belts.
If Trouble Arises
7–39