Mazda 2 2015 Owner's Manual page 411

Interior Features
®
Bluetooth
®
Bluetooth Preparation (Type C/
Type D)
Device pairing
®
To use Bluetooth
the device equipped with Bluetooth
to be paired to the unit using the following
procedure. A maximum of seven devices
including Bluetooth
hands-free mobile phones can be paired.
NOTE
®
The Bluetooth system may not operate
for 1 or 2 minutes after the ignition
is switched to ACC or ON. However,
this does not indicate a problem. If the
®
Bluetooth system does not connect
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth
setting on the device is normal and
attempt to reconnect the Bluetooth
device from the vehicle side.
Pairing Procedure
1. Select the icon on the home screen
and display the Settings screen.
2. Select the
3. Select .
4. Turn the Bluetooth
5. Select
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
device).
7. Select "Mazda" from the device list
searched by the device.
5–110
audio and Hands-Free,
®
has
®
audio devices and
®
tab.
®
setting on.
to display the
®
device (Peripheral
8. (Device with Bluetooth
Input the displayed 4-digit pairing code
into the device.
(Device with Bluetooth
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
Connection permission and phonebook
access permission for your mobile
device may be required depending on
the mobile device.
9. If pairing is successful, the functions of
the device connected to Bluetooth
displayed.
10. (Devices compatible with Mazda
Email / SMS function)
SMS (Short Message Service)
messages, and E-mail for the device are
downloaded automatically. A download
®
permission operation for your device
may be required depending on the
device.
NOTE
When Call history and messages
are downloaded automatically, each
automatic download setting must be on.
Refer to Communication Settings on
page 5-130 .
After a device is registered, the system
automatically identifi es the device. By
activating Bluetooth
by activating Bluetooth
after switching the ignition from OFF to
ACC, the device connection condition is
indicated in the centre display.
®
version 2.0)
®
version 2.1
.
®
are
®
Hands-Free again, or
®
Hands-Free fi rst