Mazda 2 2015 Owner's Manual page 410

7. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. "Please read
phrase 1")
8. Say: [Beep] "0123456789" (Say
the voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
9. Prompt: "Speaker enrolment is
complete."
NOTE
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
correctly and naturally.
(For example, "1234" must be read out
"one, two, three, four" not "twelve,
thirty four".)
Do not read out parentheses. "(" and
hyphens "-" are used for separating
numbers in a phone number.
Ex.
"(888) 555-1212" must be spoken "Eight,
eight, eight, fi ve, fi ve, fi ve, one, two, one,
two."
Phrase
1
2
3
4
5
6
7
8
NOTE
The applicable phrase appears in the
audio display.
After user voice registration is
completed, voice guidance "Speaker
enrolment is complete" is announced.
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Voice training"
3. Prompt: "Enrolment is enabled/
disabled. Would you like to disable/
enable or retrain?"
4. Say: [Beep] "Disable" or "Enable"
5. When "Disable" is spoken, the voice
recognition learning is turned off.
When "Enable" is spoken, the voice
recognition learning is turned on.
6. Prompt: "Speaker Enrolment is
disabled/enabled."
Interior Features
Bluetooth
Command
0123456789
(888) 555-1212
Call
Dial
Setup
Cancel
Continue
Help
5–109
®