Mazda 2 2015 Owner's Manual page 401

Interior Features
®
Bluetooth
NOTE
®
If a Bluetooth
been paired to the vehicle as a hands-
free mobile phone, it does not need
to be paired again when using the
device as a Bluetooth
Conversely, it does not need to be
paired again as a hands-free mobile
phone if it has already been paired as
®
a Bluetooth audio device.
Device registration can also be done
using voice recognition.
Concerning the operation of a Bluetooth
audio device itself, refer to its instruction
manual.
®
Some Bluetooth audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
pairing procedure differs depending on
whether it has a PIN code or not.
Pairing a Bluetooth
has a four-digit PIN code
1. Using the audio control dial, select
the pairing mode " PAIR DEVICE "
in the " BT SETUP " mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
After " ENTER PIN " is displayed on
the audio display for three seconds,
" PIN 0000 " is displayed and the PIN
code can be input.
5–100
device has already
®
audio device.
®
audio device which
3. Input the PIN code of your Bluetooth
audio device by pressing channel preset
buttons 1 to 4 while " PIN 0000 " is
displayed.
Press channel preset button 1 to input
the fi rst digit, 2 for the second, 3 for the
third, and 4 for the forth. For example,
if the PIN code were "4213", press
channel preset button 1 four times (1,
2, 3, 4), button 2 twice (1, 2), button
3 once (1), and button 4 three times
(1, 2, 3). If the " PIN 0000 " display
disappears before fi nishing the PIN
code input, repeat the procedure from
Step 1.
®
NOTE
Some devices accept only a particular
pairing code (Usually, "0000" or
"1234").
If pairing cannot be completed, refer
to the owner's manual of your mobile
device, and try those numbers if
necessary.
4. Press the audio control dial while the
input PIN code is displayed.
" PAIRING " fl ashes on the display.
5. Operate the Bluetooth
and set it to the pairing mode while
" PAIRING " is fl ashing.
6. When the pairing is completed, " " and
" PAIR SUCCESS " are displayed after
about 10-30 seconds, after which
" PAIR SUCCESS " continues to be
displayed for three seconds, and then
the unit returns to the normal display.
®
®
audio device