Changing To 24-Hour Clock; Changing To Centigrade; Calibrating Oven Temperature - Thermador X302X Care & Use Manual

To Change to a 24 Hour Clock from the
Preset 12 Hour Clock, follow these steps:
1. Turn off all ovens.
UPPER
2. Touch and hold the UPPER
OFF
the OFF pad in a single oven, then touch the CLOCK
pad.
3. 12H appears in the Clock window; release all pads.
4. Touch CLOCK and 24H replaces 12H. This alternates
when CLOCK is touched.
5. To complete the change, touch
To Change to a Centigrade Temperature
from the Preset Fahrenheit, follow these
steps:
I. Turn off all ovens.
UPPER
2. Touch and hold the
OFF
the CONVECTION pad OFF.
3. F appears in the temperature digits; release all pads.
4. Touch CONVECTION and C replaces F. This
alternates when CONVECTION is touched.
5. To complete the change, touch
Do-It-Yourself Maintenance
pad in a double oven or
UPPER
or OFF.
OFF
or the OFF pad and then
UPPER
or OFF.
OFF
Oven Thermostat
The electronic thermostat has been preset to 0°F and
accurately maintains its setting. If the browning results are
too light or too dark for your preferences, you can raise or
lower the setting.
To Calibrate the Oven Temperature:
1. Turn off all ovens.
2. Touch and hold the
the OFF pad in a single oven.
UPPER
3. Hold the
OFF
pad.
4. 0 appears in the temperature digits; release all pads.
5. Touch BAKE and 0 changes in increments of 5 degrees
each time it is touched. The maximum adjustment is
± 35ºF. In Centigrade the range is ± 3ºC to 21ºC.
6. To complete the change, touch
To Calibrate the lower oven in double oven models,
repeat the steps with this exception, touch the
UPPER
instead of the
OFF
Page 34
UPPER
pad in a double oven or
OFF
or OFF pad and touch the BAKE
UPPER
or OFF.
OFF
pad.
LOWER
OFF