ParaBody 426103 Manual page 5

7
3
FIGURE 7
STEP 7
• Position two 3/8 X 1/2" SPACERS (2) inside the bracket on the BASE and slide one 3/8" THREADED SHAFT (9) through the
bracket. See FIGURE 7.
• Assemble two 3/8" HEX NUTS (8), two SWIVEL SNAP (3), and two 3/8" LOCK NUTS (7) to the 3/8" THREADED SHAFT (9) as
shown in FIGURE 7.
BASE
8 HEX NUT
9
10
3
8 HEX NUT
5
7