ParaBody 426103 Manual page 34

FIGURE 14
STEP 14
• SECURELY attach the top of the front SHROUD (with label) & rear SHROUD to the TOP BOOM using the four previously removed
3/8" X 1" BUTTON HEAD CAP SCREWS. See FIGURE 14.
FIGURE 15
STEP 15
• SECURELY attach the bottom of the front SHROUD (with label) & rear SHROUD to the TOP BOOM using the four previously removed
3/8" X 1" BUTTON HEAD CAP SCREWS. See FIGURE 15.
The installation of the 426103 Elastic Cord Conversion Kit is complete. If unsure of proper use of
equipment, call your local Parabody distributor or call the Parabody customer service department at
3/8" X 1" BUTTON
HEAD CAP SCREW
(800) 328-9714.
34
SHROUD
3/8" X 1" BUTTON
HEAD CAP SCREW