Load Control Menus - Kohler 38RCL Operation Manual

3.19 Load Control Menus

The generator set may be connected to a Load Control
Module (LCM) or a Model RXT transfer switch equipped
with a Load Shed kit. The Load Control menu displays
the status of the load control inputs and outputs, and
allows a test of the load control output relays.
Generator current is displayed as a percent of the
maximum generator capacity. The load control module
adds and sheds loads based on the generator current.
Load ---->
Control
Figure 3-23 Load Control Status Menu
46 Section 3 RDC2 Controller Operation
Generator
Current: 123 %
Load ---->
Control 1
<---- Return
The test function cycles the relays in the order of their
priority.
For detailed information about load control operation,
refer to TT-1574, provided with the LCM kit, or TT-1609,
provided with the Load Shed kit.
Test Outputs
Push Select (blinking)
Input 1:
In/Active
Input 2:
In/Active
Output 1:
Add/Shed
Output 2:
Add/Shed
Output 3:
Add/Shed
Output 4:
Add/Shed
Output 5:
Add/Shed
Output 6:
Add/Shed
<---- Return
tp6810
TP-6810 11/13