Vanc Data Recording/Playback; Vanc Data Recording; Vanc Data Playback - Panasonic AJ-HD1400E Operating Instructions Manual

VANC data recording/playback

VANC data recording

1
Detects the VANC data packets that multiplex recorded
in the following range of the Y stream of HD SDI.
1080i: L9–L20, L571–L583
720P: L9–L25
<Note>
HANC data packets are not be detected.
2
Records VANC data packets up to the following volume
in the VAUX region of the DVCPRO HD format in the
order of the earlier line.
1080i: 5760 word/frame
720P: 2880 word/frame
<Note>
Data packets that exceed the capacity will not be
recorded or played back.
3
Records the video signal from the HD SDI simultaneously.
<Note>
Recording and playback of VANC data only are not
possible.

VANC data playback

1
If the VTR mode is one of the following, VANC data will
be multiplexed to the Y stream of the HD SDI and will be
played back with the video signal.
Normal playback mode
Simultaneous playback mode
Edit playback mode
EE mode
<Notes>
If an operation mode other than the above, such as FF,
REW, JOG, VAR, the video signal will only be played
back by muting VANC data.
Playback of VANC data only is not possible.
2
VANC data packets will be multiplexed to the same line
of the multiplex line.
<Notes>
For format conversion playback, the video signal only
will be played back by muting VANC data.
Metadata recorded on the tape will be output giving
UMID information first priority. When metadata is
output, set to a line other than the original multiplexed
line or select "BLANK."
21